No Drip Window Air Conditioner (Why & Solving)


Wondering why no drip window air conditioner? Air conditioners work by drawing in hot air from a room, cooling it, and then circulating the cooled air back into the living room. In order to do this, the air conditioner needs to be able to draw in air from outside the room. Most window air conditioners have a small hole in the bottom of the unit that allows for this.

Then you find out your window AC not draining any water or even leaking. Here are some points you need to know to handle this no drip window air conditioner problems:

Do all window air conditioners drip water?

Do all window air conditioners drip water?

No, not all window air conditioners drip water. In fact, most newer models are designed not to drip at all. The main reason why window air conditioners may drip is because of condensation.

When warm air hits the cold air of the air conditioner, it causes condensation to form on the coils. This condensation then drips down into a pan and out the drain hole.

Why Is My Window AC Leaking Water?

Why Is My Window AC Leaking Water?

Window air conditioners are designed to remove moisture from the air as they cool it. In most cases, the water that’s removed from the air drips into a pan or tray that’s located under the unit. From there, it evaporates and is removed from your home.

However, if your window air conditioner is dripping water onto the floor, there are a few things that could be causing the problem. Here are some of the most common reasons why your window air conditioner might be dripping water onto the floor:

  • The unit is not level. If your air conditioner is not level, the water will not drain properly and will drip out of the unit.
  • The drain line is blocked. The drain line is responsible for carrying the water away from the unit. If it’s blocked, the water will back up and drip out of the unit.
  • The unit is overcooling the room. When an air conditioner overcools a room, it removes too much moisture from the air. This can cause excess water to drip from the unit.
  • There’s a problem with the fan. If there’s a problem with the fan, it can cause moisture to build up inside the unit and drip out onto the floor.

Why no drip window air conditioner

Why no drip window air conditioner

Make sure you check your type of window AC while assessing the problems. Besides, there might be another reason why your AC is not draining. Here are some possible reason: 

If your window air conditioner isn’t draining water, chances are one of these three things is happening: 

  • The drain pan is full, the condensate pump isn’t working, or the condensate line is blocked.
  • A window air conditioner has a small tank that collects water vapor from the air as it cools. This water vapor condenses on the evaporator coils and drips into the drain pan. The pan drains through a small hole in the bottom of the unit.
  • If your AC unit’s drain pan is full, water will overflow and drip out of the unit onto your floor. To fix this, simply empty the drain pan.
  • If your AC unit isn’t draining properly, chances are its condensate pump isn’t working. The condensate pump moves water from the AC unit to a nearby drain or outside through a hose.

How to fix no drip window air conditioner

How to fix no drip window air conditioner edited

If your window air conditioner isn’t dripping water, there are a few things you can do to fix the problem.

  1. First, check to see if the unit is properly installed. If it’s not, then simply re-install it according to the manufacturer’s instructions. If the unit is installed correctly, then the next step is to clean the filter. A dirty filter can cause the unit to not work properly, so be sure to clean it regularly.
  2. Next, check the evaporator coils and make sure they’re not frozen. If they are, turn off the air conditioner and let them thaw for about an hour.
  3. check the drain pan and make sure it’s not full of water. If it is, empty it and try again.
  4. Finally, if your unit still isn’t dripping water or leaking, then you may need to call a professional for assistance.

Are window AC units water proof?

Window air conditioners are not 100% waterproof, but they are designed to withstand light rain and other Forms of moisture. If you live in an area that experiences severe weather conditions, it is important to take extra precautions to protect your AC unit.

There are a few things you can do to help keep your window AC unit in good condition:

  • Install the unit in a sheltered location, such as under an awning or overhang.
  • Invest in a waterproof cover for your AC unit. This will help protect it from the elements and extend its life.
  • Check the seals around the unit regularly, and replace them if they are damaged or worn.
  • Make sure the drain pan is emptied regularly, and that any holes or cracks are repaired promptly.

By taking these steps, you can help ensure that your window AC unit lasts for many years.

Do new window air conditioners drip water

Most new window air conditioners drip a little water during operation. This is normal, and the amount of water should be minimal. If you find that your air conditioner is dripping a lot of water, there are a few things you can check.

  • First, make sure that the unit is properly installed and that the drainage holes are not blocked.
  • Next, check theair filter and clean or replace it if it is dirty.
  • If neither of these solutions solves the problem, contact the manufacturer for further assistance.

Should I drill a hole in my window air conditioner?

Most window air conditioners come with a central condensation drip hole and an accompanying drain tube. Some units also have additional weep holes in the side of the chassis to help prevent water buildup and maximize efficiency. If you notice that your unit is leaking water, it is probably due to a clogged drip hole or drain tube. You can try clearing the obstruction with a paperclip or other small object, but if that does not work, you may need to drill a new hole.

Before drilling, be sure to consult your air conditioner’s manual to ensure that this will not void your warranty. Once you have decided to proceed, mark the desired location of the new drip hole with a pencil or marker. Drill a small pilot hole first, then enlarge it to the appropriate size using a slightly larger drill bit. Be careful not to make the hole too large, as this could weaken the structure of the unit.

After drilling the new drip hole, reattach the drain tube and confirm that water is draining properly. If you continue to experience leakage, please contact a qualified technician for assistance.

Why doesn’t my window AC have a drain hole?

Your window air conditioner doesn’t have a drain hole because it’s not supposed to drip. If it’s dripping, that means there’s a problem. The most common problem is that the unit is not level. If the unit is not level, the condensate will drip out of the unit. You can try to level the unit by adjusting the legs. Another possibility is that the condensate pan is full. The pan is located under theunit. If it’s full, you’ll need to empty it.

How much water does a window AC drain?

Window air conditioners typically drain between 20 and 30 gallons of water per day, depending on conditions. If the unit is not properly maintained, this number can increase significantly.

Self-evaporating window air conditioner

The main function of a window air conditioner is to cool the air in a room. Some models also have the ability to heat the air, and this is done by using a heat pump. There are different types of window air conditioners available on the market, and one of them is the self-evaporating window air conditioner. As the name suggests, this type of air conditioner evaporates the water that it condenses, and this process is used to cool the air.

"LIVE, LOVE, LOCAL" Support local American Brand and Make Impact!

Leave a Comment