Sunbeam Electric Blanket Blinking (Why & Fixing)

If you are experiencing a blinking issue with your Sunbeam Electric Blanket, don’t worry. This is a common problem that can be resolved easily with a few simple steps. The blinking light on the blanket indicates that there might be an issue with the connection between the control unit and the heating elements.

Here are more detailed explanation on why and how to fix your Sunbeam electric blanket blinking!

Table of Contents

What Does It Mean When Your Heated Blanket Is Blinking?

If you own a Sunbeam electric blanket, you might have experienced the blinking of its light. The blinking means that there is something wrong with your blanket, and it’s not functioning correctly. When your heated blanket blinks, it can be frustrating because you don’t know what the issue is or how to fix it.

Why does my Sunbeam heating pad keep blinking?

Sunbeam can be a perfect additional for your bed alternatives for small spaces! The blinking light on your heating pad indicates that something isn’t right with its functioning. There could be several reasons why this occurs, Here are some reasons why:

1. Overheating

Overheating is one of the most common reasons why your Sunbeam heating pad might be blinking.

This happens when the internal temperature sensor detects that the temperature has risen above the safe limit, causing it to shut down to prevent any damage or injury. Overheating can happen due to various reasons such as leaving the heating pad on for too long or using it incorrectly.

2. Faulty connection

One potential cause of a blinking Sunbeam heating pad is a faulty connection between the pad and the power outlet.

If there is any damage to the cord or plug, it can disrupt the flow of electricity to the pad, causing it to blink or not work at all. To address this issue, check for any visible damage on the cord or plug and ensure they are properly inserted into their respective outlets.

3. Controller issue

One common reason for a blinking Sunbeam heating pad is an issue with the controller. The controller may not be securely connected to the heating pad or may have become damaged over time. In this case, it may be necessary to replace the controller entirely in order to fix the problem.

Another possible reason for your Sunbeam heating pad blinking could be due to an issue with the wiring. Over time, wires can become frayed or disconnected, which can cause interruptions in power and result in the blinking light on your heater.

4. Low battery

One possible explanation is that the batteries in your heating pad are simply low or dead. This is more likely to happen if you’ve been using your heating pad frequently without replacing the batteries.

How do I fix my Sunbeam electric blanket blinking?

Many people experience this issue with their electric blankets on their bed, and there are several solutions to fix it. Here’s what you need to do.

1. Cool it down

One of the easiest ways to fix the blinking problem is by cooling down the blanket. An overheated blanket can cause it to malfunction and blink repeatedly.

So, turn off your blanket and unplug it from the power source for at least 30 minutes. This will allow the internal thermostat to reset itself and cool down completely before plugging it back in again.

2. Reconnect

Firstly, check the power cord connection on both ends of the blanket. Ensure that it is securely plugged into both the wall outlet and the controller port. If it still blinks, try unplugging it for 30 seconds before plugging it back in again. Sometimes a quick reset is all that’s needed to get things working properly.

If these steps don’t work, then you may need to check for any damaged wires or connections within the blanket itself. Carefully inspect each wire for frayed or broken parts, and make sure all connections are tightly secured.

3. Check the control module

Try unplugging the power cord from the wall outlet and then plugging it back in after 30 seconds. This simple step often resets the control module, allowing it to function properly again. If this doesn’t work, double-check that all connectors between the blanket and controller are securely fastened.

4. Replace New Batteries

First, locate the battery compartment on your controller. It’s usually located on the back of the controller behind a small cover or door. Once you’ve found it, open the compartment and remove any old batteries that are inside. Make sure to dispose of them properly before inserting new ones.

Next, insert fresh batteries into the compartment in their correct orientation following +/- signs. Close up and secure any cover or door over top of it so as not to lose them again easily after use.

5. Check for Visible Damage

When it comes to fixing your Sunbeam electric blanket blinking, the first thing you need to do is check for visible damage. This can include any tears, holes or frayed wires in the blanket. If there is no visible damage, try unplugging the blanket and plugging it back in again. Sometimes a simple reset like this can solve the issue.

If there is visible damage, it may be best to purchase a new electric blanket altogether.

However, if you are determined to fix your current one, consider patching up any small holes with fabric glue or sewing on a patch of fabric over larger tears. It’s important to note that attempting to repair frayed wires yourself could be dangerous and should be left to a professional electrician.

Ultimately, it’s important to prioritize safety when dealing with an electric blanket. Always follow manufacturer instructions and avoid using a damaged blanket at all costs.

Why sunbeam electric blanket blinking after washing?

The most common reason for your Sunbeam electric blanket blinking after washing is because there are still some moisture or dampness left in the controller or wires. This can cause a short circuit in the system, which causes the blinking light as a safety measure to prevent any potential harm. The good news is that this is typically an easy fix by simply drying off the affected areas properly before using it again.

Another reason why your Sunbeam electric blanket may blink after washing could be due to a faulty connection between the heating elements and controller wires.

What does error code F2 mean on Sunbeam heated mattress pad?

If you’re experiencing issues with your Sunbeam heated mattress pad and the F2 error code is blinking, it means there’s a problem with the temperature control system. This error message appears when the controller senses that one of the heating circuits in your pad may be damaged or faulty.

Your Sunbeam electric blanket may also stop working if this code persists. However, don’t fret as you can simply reset the controller to fix this issue.

To reset your Sunbeam heated mattress pad, start by unplugging it from its power source for around 30 seconds before plugging it back in. Once reconnected, turn on the controller and set it to its highest setting to warm up quickly. If the F2 error code disappears, your pad should now work correctly; however, if it persists, contact Sunbeam customer service for further assistance.

How do I reset my Sunbeam electric heater?

Firstly, ensure that your Sunbeam electric heater is unplugged and turned off before attempting to reset it. Then, locate the power button on your device and hold it down for 5-10 seconds. Release the button and wait for a few minutes before plugging it back in and turning the heater on again.

If this does not work, try checking if there are any obstructions around the heating vents or if they need cleaning. You can also check if the temperature setting is appropriate for your room’s size and conditions.

How long is the warranty on a Sunbeam heated blanket?

The length of the warranty on your Sunbeam electric blanket largely depends on the model and type purchased, but most Sunbeam blankets come with a 5-year limited warranty that covers any defects in material or workmanship.

However, it’s important to note that certain conditions may void the warranty. For example, if your Sunbeam electric blanket is damaged due to misuse or neglect, or if it has been altered in any way, then the warranty will be voided. Additionally, damages caused by accidents or natural disasters are not covered under the standard warranty.

Is it OK to leave electric blanket on all night?

Well, the answer is both yes and no.

Many electric blankets nowadays are designed with safety features that prevent them from overheating or causing any harm. However, it’s still essential to take necessary precautions while using an electric blanket. First and foremost, make sure your blanket is in good condition and doesn’t have any visible damage. Next, always follow the manufacturer’s instructions carefully when it comes to usage and care of your blanket.

One thing you should never do is leave your electric blanket on all night if it’s an older model or damaged in any way. This could increase the risk of fire hazards or other safety concerns.